The Importance of Backflow Testing

Backflow Testing helps to keep municipal water systems clean. Without it, chemicals, medical waste, debris, and other contaminants could backflow into the local water supply.

Backflow Testing

A backflow test kit is a tool that generates data that a knowledgeable, certified tester can interpret. Proper handling, maintenance, and annual verification ensure that the test kit works properly.

Backflow prevention devices are essential to keep contaminated water from entering the public water supply. Having your backflow tested routinely helps ensure that these devices function properly and protects you and your family from dangerous diseases and other health issues caused by drinking tainted water.

Many local governments and public water companies require that all businesses have their backflow prevention devices tested on a regular basis. Failure to test and maintain your backflow prevention devices may result in fines or other penalties. In addition, backflow testing can help protect your business from liability issues related to tainted water that is served in your facility.

A backflow test is a simple, inexpensive way to make sure that your backflow preventer device is working as it should. The process of conducting a backflow test varies wildly depending on the type of preventer you have installed in your pipes, but generally, a technician will simply shut off the valves in your backflow device and then use a test-cock to fill one of the valves with water while leaving the other open. They will then record the pressure reading from each of these test-cocks to determine whether the device is passing or failing.

In addition to the obvious reasons why you should have your backflow preventers regularly tested, these tests are also required by a number of laws and regulations that govern the safety of public water. Backflow testing is the best way to make sure that your backflow prevention devices are working properly and protecting you and your family from tainted water.

Finally, it is important to have your backflow tests completed by a certified professional. In addition to having the proper backflow testing equipment, a certified professional will have experience in the field and will understand how to correctly conduct the tests. This will ensure that your backflow testing results are valid and accurate.

Having your backflow preventers tested and maintained is easy, cheap, and necessary for the health and safety of your home. To get the best results, have your backflow preventers tested by a certified professional and have any that fail replaced immediately.

How Do I Test My Backflow Prevention Devices?

It might not be the first thing on your to-do list, but skipping out on backflow testing can lead to hefty fines from the city or, even worse, water contaminated with sewage. Fortunately, you can avoid this situation by having a certified backflow tester test your backflow preventer devices regularly.

Backflow prevention devices are designed to protect potable water from contamination by backwash—which occurs when contaminated water reverses flow and enters clean water lines. While this might seem gross, it poses a serious health concern as it can contain diseases like cholera, typhoid, and dysentery.

The process of backflow testing consists of several steps, including shutting off the downstream shut-off valve and connecting test kit hoses to each device. This allows a backflow tester to measure the pressure inside your plumbing system and determine whether any devices are experiencing backflow. Additionally, a backflow tester can identify any potential problems with your water system that may be causing backflow.

A certified backflow tester uses specialized equipment to conduct a backflow test. These devices include gauge assemblies and backflow testing kits, which allow them to check for the presence of contaminants and assess the functionality of a backflow preventer device. They also isolate the backflow preventer valve to prevent water from flowing in the wrong direction during the test. In addition, the backflow tester will need to shut off the water main for about 30 minutes during the test.

Once the backflow test is complete, a backflow certified tester will prepare a report of its findings. This report will be submitted to the local governing body for approval. The process of submitting this paperwork can take up to a week, so it’s important to partner with a backflow testing company that offers a streamlined software solution.

Using Formlink’s backflow testing software can save you valuable time by streamlining the inspection process. Our software helps you record backflow test results quickly and efficiently, allowing you to submit them online without having to wait for your local water board to process them. Additionally, our software can automatically email your backflow test reports to the appropriate parties.

What Should I Do If My Backflow Prevention Devices Fail?

Backflow prevention devices prevent contaminated water from entering your commercial building’s plumbing system. While your backflow device is a critical component of your building’s plumbing system, it is not foolproof. Sometimes, your backflow device will need repair or replacement. Annual testing and routine maintenance by experienced, certified technicians is a great way to keep your backflow prevention system in working order.

If your backflow test shows that your backflow prevention assembly is in need of a repair, it is important to have the assembly repaired as soon as possible. This is to avoid the risk of back-siphonage which may result in used, dirty water flowing into your building’s plumbing system and contaminating the drinking water that you rely on for health and wellness.

There are many reasons why your backflow device may need a repair. One reason could be that the first check valve is not opening properly at certain water pressures. Another reason is that the second check valve may not be stopping water from leaking past it. A third possibility is that the relief opening is not opening properly.

It is important that your repair technician is familiar with the installation of your backflow device. This is because the repair technician will need to know how to remove each component from the backflow assembly body and evaluate the components for what caused them to fail. For example, if a check assembly is not releasing water through its opening, it will be important that the repair technician knows whether or not there is a physical obstruction such as a piece of debris lodged between the disc and the seat of the valve.

Regional conditions like temperature, turbidity and mineral content can shorten the life of your backflow prevention device. This is why it is important to schedule regular inspections by certified technicians to catch these potential problems before they turn into costly repairs or backflow contamination.

It is also important to remember that a repaired backflow prevention device must be recertified after being repaired. The certified tester will use a gauge to add or relieve pressure in the backflow device and then record the results on the backflow test report.

What Should I Do If My Backflow Prevention Devices Pass?

Backflow prevention devices are essential equipment that provides clean water to homes, businesses, schools, and hospitals. Unfortunately, these devices can become damaged or fail for a variety of reasons. As such, it’s important to test your backflow preventers regularly.

Testing a backflow prevention device is easy and fast. During the test, a plumber shuts off the main water valve to the backflow preventer and then adds or relieves pressure by hooking up test kit hoses. This allows the technician to check for any signs of wear and tear in the assembly, including broken parts or cracks. Additionally, the tester will use a calibrated testing device to ensure accurate results and to protect public health and safety.

Once a backflow preventer passes inspection, the tester will attach a tag to it that shows the date of the test, who conducted the test, what the backflow prevention device is connected to, and any other specific information about the device. The tags will also include the tester’s contact information. It’s important to have your backflow prevention devices tested by a specialized plumber who knows the ins and outs of these complex pieces of equipment.

You can find a certified backflow preventer tester by searching online or asking your local plumbing company for recommendations. Once you’ve found a backflow test specialist, schedule an appointment. If your backflow preventer fails inspection, notify the local water authority. It’s essential to do this as quickly as possible so the backflow preventer can be repaired or replaced before it causes backflow contamination that could affect the public water supply.


Trenchless Sewer Maintenance

plumberTrenchless sewer maintenance allows Plumbers Aurora CO to repair a damaged pipe without digging a trench. This saves time and money and prevents damage to landscaping, driveways, and roads.

Traditional sewer line replacement can take a week or more to complete due to all the digging involved. But with modern trenchless methods, plumbing crews only need to dig a few access holes.

Keeping your sewer lines in good condition is essential for the hygienic function of your home. Clogged or broken sewer lines can cause sewage to back up into your home or ooze out of your yard, and both scenarios are dangerous and unsanitary. When a problem occurs, it is best to call an experienced plumbing company to perform a video inspection and determine what the issue is. There are a variety of ways to repair or replace sewer lines, but trenchless methods are the most effective and least invasive way to do so.

Traditional excavation methods are messy and cause extensive damage to your landscaping and property. Trenchless repairs keep your yard intact and can be performed quickly with minimal environmental impact.

In the past, it was necessary to dig large holes in order to clean or repair a sewer line. This caused a lot of mess and was very disruptive to the homeowner. With trenchless technology, however, this is no longer the case.

The first step in trenchless sewer line repair is to inspect the line with a specialized camera. The plumber can then see if the pipe is in good shape and can be salvaged through a pipe bursting or lining method. If the pipe is too damaged, it may need to be replaced entirely.

One popular trenchless replacement method is called slip lining or cured-in-place pipe (CIPP). This technique involves placing an epoxy-saturated liner inside the existing pipe. The lining is then inflated, creating a new pipe inside the old one. The lining is a durable material that can last for decades, and it seals the host pipe to prevent sewage leaks.

Trenchless sewer line repair is also a much less toxic option than traditional excavation. The liners used are made from eco-friendly materials that won’t leach into the soil. Additionally, the process doesn’t involve heavy machinery that uses diesel fuel and pollutes the environment.


Sewer line repairs are a necessity for homeowners, but they don’t have to destroy your backyard or disrupt your everyday routine. With advances in technology, plumbing service technicians have developed a less destructive repair method: trenchless sewer repair. In the past, a broken or clogged sewer line would require digging up your yard to fix it, but with trenchless technology, plumbers can access your damaged pipes through two small holes instead of digging an entire yard.

This process involves lining your sewer pipes with an epoxy resin. Once the pipe is lined, it’s stronger and more resistant to future damage. This is a cost-effective and efficient solution for fixing a malfunctioning sewer line.

Trenchless sewer repair is also quicker than traditional methods. This is due to reduced labor and material costs. Additionally, it can be completed in as little as a day. However, there are some instances where the trenchless repair method is not suitable. If the pipe is corroded or the original line has collapsed or back-pitched, it may be necessary to dig up the existing lines.

Trenchless maintenance is also environmentally friendly, as it does not disturb the environment around your property. The excavation used to be a messy, noisy, and time-consuming process, but with the advancement of technology, sewer contractors can complete the job without damaging your landscape or yard. Trenchless repairs are able to reach hard-to-reach places, such as under driveways and in building walls, with minimal disruption.

Compared to traditional methods, trenchless repair is less expensive and more effective. In fact, it can save you money by preventing costly restorations of impacted surfaces such as flooring and foundations. It also saves you from having to relocate during repairs, which is especially useful if you have children or pets.

If you have a problem with your sewer line, contact a professional plumber today to discuss the benefits of trenchless repairs. A faulty sewer line can cause extensive damage to your home, and you’ll need to take immediate action. If you don’t, the resulting backups can cause significant flooding and other problems.


The drainage pipes that run from your home to a septic tank system or the city sewer line are usually underground. If these lines become damaged or clogged, it is essential to address the issue immediately. Fortunately, these pipes can be fixed without having to dig large trenches across your property. Trenchless sewer repair is a great way to get your pipes back in shape without damaging the landscaping and outdoor features that you’ve worked so hard to maintain.

Trenchless sewer repair works by using a small machine to snag the damaged pipe and insert a new one into its place. The entire process can be completed in just a day, so you don’t have to deal with the mess and inconvenience of traditional sewer repairs. Plus, since there’s less digging involved, there’s also less of a chance that the sewage will spill out of the line and into your yard, which can damage grass, flowers, shrubbery, and even trees.

While trenchless sewer maintenance may not be suitable for every situation, it’s an excellent option for most residential properties. The process begins by feeding a plumbing camera through the sewer line to check for any damage or blockages. Once the inspection is complete, your plumber will begin repairing or replacing the line with the help of the small machine.

Another benefit of trenchless sewer repair is that it’s often more effective than traditional methods. The cured-in-place pipe lining technique creates a pipe within the existing pipe, which is a great solution for fixing leaks and cracks that occur in the interior of the pipe. The liners are highly durable and rated to last 50 years or more, so they’re an excellent choice for preventing future issues.

Pipe bursting is another popular trenchless sewer repair method. This process uses a specialized head to break apart the old line while simultaneously pulling a flexible new pipe into its place. This method can be used to replace a single damaged section of pipe or multiple pipes throughout your property. The resulting replacement pipes are high-quality HDPE, which won’t corrode or decay and can be expected to last more than 100 years.


Trenchless technology is less expensive than traditional methods of repairing sewer lines. However, it is still more costly than repairing pipes that have not been damaged. This is because you will have to pay to replace landscaping and other items that were destroyed in order to access the sewer line. The cost of these repairs can add up quickly.

The costs of trenchless maintenance also vary depending on how much work needs to be done and where the pipe is located. For example, if your sewer line is located under a swimming pool or patio area, it may be more difficult to complete the repair without digging. This could require a larger crew and additional equipment to get the job done.

It is important to hire a contractor that has experience in trenchless maintenance and can provide references from previous customers. You should also make sure that the contractor is licensed and insured. You can check this information on the internet or ask your friends and family for recommendations.

Before the contractor begins the repair, they should perform a sewer camera inspection to determine how extensive the damage is. This will help them prepare a quote for you. It is important to compare quotes from several contractors before choosing one. This will ensure that you are getting the best price and service.

Traditional sewer line replacement involves digging a large trench around the affected pipe. This can cost thousands of dollars in labor and materials. Trenchless methods avoid this problem by requiring only small access holes to be dug. In addition, they do not cause as much disruption to your property. This can save you money on the cost of restoring and replacing your landscaping, sidewalks, and driveway.

The two main methods used for trenchless sewer line replacement are pipe bursting and pipe lining. Both of these techniques can be used on a variety of pipe materials and diameters. They can also be used to replace pipes that have been weakened by root intrusion or corrosion. The cost of trenchless methods can be higher than traditional ones, but they are worth the investment in the long run.