Home Services

Mold Removal – What You Need to Know

If you suspect mold in your home, it is important to have it tested. A good test is to swab the stain with household chlorine bleach to see if it lightens or disappears.

The first step of remediation is removing wet and porous materials such as carpeting, drywall and insulation. Remediators will also spray and scrub non-porous materials to reduce airborne spores. Click Here to learn more.

Mold removal can be a costly endeavor. Its cost can depend on the extent of the contamination and how fast the mold growth spreads. Some types of mold, such as black mold (Stachybotrys chartarum), are more toxic than others and require special attention. Black mold spores are particularly difficult to kill and can cause respiratory problems. This type of mold can also be difficult to remove from porous materials like drywall, fiberboard, and paper. This makes it important to find the source of the mold growth as quickly as possible.

In addition to the cost of labor, there may be additional costs for equipment and supplies. These include a high-efficiency particulate air (HEPA) vacuum, face masks, and protective clothing. These items are necessary to ensure the safety of the homeowner during the remediation process.

A mold inspection should be done before beginning any work. This will identify the source of the mold and determine the severity of the situation. This will help the mold remediation company to estimate the cost of the project. Depending on the results of the inspection, the mold removal company will advise the homeowner on whether the project can be completed as a DIY task or if it will require professional assistance.

The costs of the mold removal and remediation project can increase significantly if the source of the moisture is not identified and addressed. In these cases, it is best to hire a professional mold remediation service to handle the project. This will help you avoid expensive damages to your home’s structure and health.

It is essential to check your insurance policy to see if it covers mold remediation. Some policies cover this expense if the damage is caused by an unforeseeable circumstance, such as a burst pipe. In addition, you should make sure to make your home inhospitable to mold by addressing the source of the moisture, such as a leak or poor ventilation. Then, you can take steps to prevent the problem from occurring again.


Mold removal can be a hazardous process. It requires proper personal protection to prevent inhalation of mold spores, which can cause various health issues including allergies, lung irritation, and skin rashes. It is recommended that you wear gloves, a mask, and goggles during the cleaning process. It is also important to isolate the area and keep spores from spreading to other areas of the house.

The first step in mold remediation is to evaluate the situation and determine what needs to be done. A trained mold remediation specialist will look for the source of the mold and inspect the building to ensure that the problem is contained. Then, they will use a variety of tools to remove the mold and clean the affected areas. They will also check behind wall coverings and ceilings to make sure that all the mold is gone.

Once the mold is removed, it’s time to repair the building and return it to its normal condition. This involves fixing any water problems that caused the excessive mold growth, such as a plumbing leak or an excessive amount of humidity. After the building is restored, it’s important to monitor the space for mold growth.

If you’re concerned about the effects of mold on your health, it’s a good idea to talk with your doctor or environmental professional. They will be able to recommend specific tests that can help determine the presence of mold in your home or workplace.

It’s also important to remember that mold spores are a natural part of our environment, and there is no way to completely eradicate them. However, if you do experience mold in your home, it is crucial that you get it removed and the moisture problem corrected as soon as possible.

While some of the precautions above may seem overly cautious, they are important to protect yourself during the mold cleanup process. It is especially important to isolate the contaminated area and not allow any unprotected family members to enter it. If you can’t contain the contaminated area, it’s a good idea to wear a respirator mask while cleaning and disinfecting. In addition, you should wash contaminated clothing and other soft fabrics separately from other items.


Mold remediation involves several different types of professionals who work together to fully assess and clean infested areas. A pro will start by locating and isolating the infested area, then covering it with plastic or polyurethane sheeting to prevent contamination of other areas of your home. They will also vacuum non-porous surfaces and spray wet or porous materials with a biocide to kill and remove spores. They will then clean and dry the area, sanitizing and disinfecting all affected surfaces. This includes drywall, carpeting, and insulation. Any items that cannot be cleaned are removed and sealed in plastic bags, sprayed to eliminate hidden spores on the outside of the bag, and then disposed of.

To ensure that the remediation is done properly, it’s important to follow strict guidelines. These guidelines are meant to help the remediator determine the best method for a particular situation, but professional judgment should always play a role in remediation decisions. For example, if the surface area contaminated by mold is over 100 square feet, it should be contained with double layers of 6 mil polyethylene and a decontamination chamber or airlock constructed for entry and exit.

After the mold is remediated, it’s vital to ensure that your house or building is ready for occupation again. This is accomplished by re-inspecting the affected areas for humidity and moisture readings as well as visual cues. It’s also possible to conduct clearance testing after the cleanup to verify that all mold spores have been eliminated from the area.

To prevent future problems, it’s important to prevent mold growth by cleaning dirty air ducts and keeping them open, removing or sealing crawl spaces, and using exhaust fans in bathrooms and kitchens. It’s also important to keep indoor humidity levels below 50 percent and to fix any leaks as soon as they are discovered.

If you suspect that you have a mold problem, call GreenWorks for a mold inspection and a quote. Depending on your insurance, you may be able to get the cost of remediation covered by your policy. It is also important to communicate with your insurance company early in the process so they can let you know what you need to do.


When it comes to completing mold removal, it’s important to take your time. It’s best to hire a professional company that will take the necessary time to properly clean and dry your home. They can also provide you with recommendations for future maintenance and prevention of mold growth in the area. The length of time that it takes to remove mold varies depending on the type and amount of contamination. If you’re dealing with a serious mold problem, it could take several weeks or even months to get the problem under control.

In most cases, mold will grow in high-moisture areas like kitchens and bathrooms. It may also appear in places that have experienced water damage or leaks. Left unattended, mold can cause health problems and is especially dangerous for those with allergies or respiratory disorders. The CDC reports that it can lead to coughing, wheezing, shortness of breath, and skin irritation.

A variety of household cleaning products can be used to clean surfaces that are contaminated with mold, but it’s best to work with good ventilation and wear protective clothing, such as gloves, goggles, and disposable face masks. Using the wrong cleaner or over-cleaning can lead to more damage and increase exposure to toxic fumes.

To clean surfaces, you can use a nontoxic mold cleaner, such as hydrogen peroxide or vinegar. Be sure to saturate the affected area, wait for several minutes, and scrub the surface with a brush. Then, rinse the area with plain water and allow it to air-dry. For outdoor surfaces, such as wood decks or vinyl siding, you can use a mildew or algae killer with a power washer or garden hose sprayer.

Mold can be prevented by reducing humidity levels in the home, fixing any leaks, and keeping fabrics and surfaces dry. To reduce humidity, open windows and use exhaust fans in the bathroom and kitchen. Keep indoor humidity below 40 percent, and install dehumidifiers in the basement and crawlspaces. It’s also a good idea to have a dehumidifier in the garage to prevent moisture from damaging cars and stored possessions.