Home Services

Energy Efficient Water Heater

Water Heater Denver is an appliance that stores a tank of hot water for use in the home. They are also known as heaters, boilers, geysers (Southern Africa and the Arab world), or calorifiers.

A thermostat records the water temperature inside the storage tank, and whenever it drops below a set point, a gas burner or electric heating element takes over to warm the water back up. The tank is insulated on both sides.

The water heater is a large household appliance that uses a significant amount of energy. The good news is that you can do many things to save money on your energy bills. Water heating accounts for about 19 percent of the average home’s energy consumption, but this can vary a lot depending on your water heater and the way you use it.

The most common water heaters are traditional storage tank models. These typically hold 40, 50, or even 100 gallons of hot water. They use electricity, propane gas, or natural gas to heat the water. The natural gas versions are the most popular in North America and Europe because they can be powered by inexpensive local supplies. They do have some drawbacks, however. They take up a lot of space and need to be located in an area that stays warm.

Other types of water heaters are called tankless, and they don’t have a storage tank. Instead, they heat water on demand when you need it. They are also more efficient, so they can save you money over time. However, they cost more upfront, and they can require more maintenance.

Water heaters are usually one of the biggest energy consuming appliances in the house, and they can be expensive to repair or replace. The average hot water heater costs about $1,500 to install and repair. The cost of a new model will depend on the size, type, and brand. In addition to the purchase price, there will be installation fees and other expenses.

A new water heater will likely cost more upfront than a repaired or replaced one, but the initial investment will pay off in reduced energy bills over time. In addition, most brands offer a 10- to 20-year warranty.

To reduce your utility costs, you can insulate the tank to keep the hot water warmer and turn down the temperature on the tank’s thermostat to 120 degrees Fahrenheit. You can also install low-flow showerheads to cut your hot water usage by 25%-60%. Lastly, washing laundry in cold water will help lower your electric bill by avoiding the need to heat the water.

Energy Efficiency

In many homes, water heaters are the second largest energy consumer after space heating. The most effective way to reduce your energy bills and carbon footprint is to invest in an ENERGY STAR® certified Water Heater.

Water heaters use natural gas, propane or electricity to heat incoming cold water for hot-water consumption by household appliances and fixtures, such as showers, clothes washers and dishwashers. Water heaters may also be powered by renewable energy sources. The temperature setting on your water heater can significantly affect its energy efficiency. The ideal setting for your water heater depends on your preferences, home appliance usage and safety concerns.

ENERGY STAR certified gas-fired storage models have an energy factor of 0.67 to 0.70, meaning they operate on about half as much gas as conventional tank water heaters do. If you are considering upgrading to a gas model, look for one with a sealed combustion system or power venting. This feature ensures your unit is vented to the outdoors and completely separates combustion air from your household air.

The ENERGY STAR certification also applies to electric demand water heaters. Typically, these units require more electrical power to produce the same amount of hot water as traditional tank units, which can result in higher utility bills. If you plan to install an electric unit, make sure your house is wired for the capacity before you purchase.

In addition to cutting your energy bill, the ENERGY STAR certification for water heaters offers you an opportunity to claim federal tax credits when you upgrade to a qualifying model. The Inflation Reduction Act of 2021 allows you to claim up to $2,000 per household for qualifying equipment, including a new ENERGY STAR certified Water Heater.

If you’re looking for a way to cut your energy costs and carbon emissions, consider installing a new high-efficiency electric tankless model or gas condensing water heater. These products can save you more than 60 percent on your energy bills and do not generate any carbon emissions during operation. To compare models, check the ENERGY STAR Product Finder for certified options in your area.


Water heaters are one of the most useful appliances in any home. Hot water is needed for many different things, from showers and baths to washing clothes and dishes. Water heaters provide the hot water for these devices, and they can also be used to heat the air in a home. These appliances can take a lot of energy to operate, so it is important to keep them running efficiently.

The most common type of water heater in homes is a tank water heater. This type of water heater contains a large storage tank that holds heated water until it is needed. The tank can hold anywhere from 20 to 80 gallons of water at any given time. The hot water is then delivered to the sinks, tubs and showers through the plumbing pipes.

Tank water heaters can require regular maintenance to avoid a variety of problems. These tasks can include flushing the system to remove scale and mineral deposits, cleaning and inspecting the heat exchanger, and testing the pressure relief valve. Water heater tanks can also be insulated to reduce the amount of heat lost during the heating process. This can save up to 16% on energy costs per year.

Another easy way to cut down on energy consumption is to install a re-circulation pump timer for the water heater. This will ensure that the hot water is only being used when it is needed, rather than constantly heating and re-heating the water. This can help you save up to $65 in energy costs per year.

There are many different types of water heaters, and it is important to choose the right one for your home. Consider the size of your family, the number of people in the household and your daily water usage habits when selecting a new water heater. A professional plumber can help you decide what the best option is for your home.

There are two main types of water heaters: electric and gas. Gas water heaters are typically more expensive than electric models, but they can save you money in the long run by reducing your energy bills. If you are considering a gas water heater, it is important to discuss the installation costs with your plumber. These charges can include additional pipe, wiring or permits.


It is easy to take hot water heaters for granted, they are a utilitarian appliance and tend to be out of sight until something goes wrong. When it does, you are suddenly faced with a dilemma of chilly showers and frozen dishes. The first thing you need to do is determine why your heater is malfunctioning. For example, if you are not getting enough hot water it could be a simple thermostat issue. This can be easily solved by locating the access panel on your heater (removing insulation and plastic cover if necessary) and adjusting the temperature using a screwdriver.

The next step is to drain your heater following the instructions on your user manual. This will help prevent any leftover hot water from leaking and possibly shooting out onto you. You should also consider flushing your heater every six months to reduce sediment buildup and to lubricate the heating element once a year.

Finally, you should look at a new water heater if the one you have is starting to show signs of wear and tear. A newer model may offer a more energy-efficient solution and will save you money in the long run. As with many household appliances, prevention is always better than cure.

Home Services

Mold Removal – What You Need to Know

If you suspect mold in your home, it is important to have it tested. A good test is to swab the stain with household chlorine bleach to see if it lightens or disappears.

The first step of remediation is removing wet and porous materials such as carpeting, drywall and insulation. Remediators will also spray and scrub non-porous materials to reduce airborne spores. Click Here to learn more.

Mold removal can be a costly endeavor. Its cost can depend on the extent of the contamination and how fast the mold growth spreads. Some types of mold, such as black mold (Stachybotrys chartarum), are more toxic than others and require special attention. Black mold spores are particularly difficult to kill and can cause respiratory problems. This type of mold can also be difficult to remove from porous materials like drywall, fiberboard, and paper. This makes it important to find the source of the mold growth as quickly as possible.

In addition to the cost of labor, there may be additional costs for equipment and supplies. These include a high-efficiency particulate air (HEPA) vacuum, face masks, and protective clothing. These items are necessary to ensure the safety of the homeowner during the remediation process.

A mold inspection should be done before beginning any work. This will identify the source of the mold and determine the severity of the situation. This will help the mold remediation company to estimate the cost of the project. Depending on the results of the inspection, the mold removal company will advise the homeowner on whether the project can be completed as a DIY task or if it will require professional assistance.

The costs of the mold removal and remediation project can increase significantly if the source of the moisture is not identified and addressed. In these cases, it is best to hire a professional mold remediation service to handle the project. This will help you avoid expensive damages to your home’s structure and health.

It is essential to check your insurance policy to see if it covers mold remediation. Some policies cover this expense if the damage is caused by an unforeseeable circumstance, such as a burst pipe. In addition, you should make sure to make your home inhospitable to mold by addressing the source of the moisture, such as a leak or poor ventilation. Then, you can take steps to prevent the problem from occurring again.


Mold removal can be a hazardous process. It requires proper personal protection to prevent inhalation of mold spores, which can cause various health issues including allergies, lung irritation, and skin rashes. It is recommended that you wear gloves, a mask, and goggles during the cleaning process. It is also important to isolate the area and keep spores from spreading to other areas of the house.

The first step in mold remediation is to evaluate the situation and determine what needs to be done. A trained mold remediation specialist will look for the source of the mold and inspect the building to ensure that the problem is contained. Then, they will use a variety of tools to remove the mold and clean the affected areas. They will also check behind wall coverings and ceilings to make sure that all the mold is gone.

Once the mold is removed, it’s time to repair the building and return it to its normal condition. This involves fixing any water problems that caused the excessive mold growth, such as a plumbing leak or an excessive amount of humidity. After the building is restored, it’s important to monitor the space for mold growth.

If you’re concerned about the effects of mold on your health, it’s a good idea to talk with your doctor or environmental professional. They will be able to recommend specific tests that can help determine the presence of mold in your home or workplace.

It’s also important to remember that mold spores are a natural part of our environment, and there is no way to completely eradicate them. However, if you do experience mold in your home, it is crucial that you get it removed and the moisture problem corrected as soon as possible.

While some of the precautions above may seem overly cautious, they are important to protect yourself during the mold cleanup process. It is especially important to isolate the contaminated area and not allow any unprotected family members to enter it. If you can’t contain the contaminated area, it’s a good idea to wear a respirator mask while cleaning and disinfecting. In addition, you should wash contaminated clothing and other soft fabrics separately from other items.


Mold remediation involves several different types of professionals who work together to fully assess and clean infested areas. A pro will start by locating and isolating the infested area, then covering it with plastic or polyurethane sheeting to prevent contamination of other areas of your home. They will also vacuum non-porous surfaces and spray wet or porous materials with a biocide to kill and remove spores. They will then clean and dry the area, sanitizing and disinfecting all affected surfaces. This includes drywall, carpeting, and insulation. Any items that cannot be cleaned are removed and sealed in plastic bags, sprayed to eliminate hidden spores on the outside of the bag, and then disposed of.

To ensure that the remediation is done properly, it’s important to follow strict guidelines. These guidelines are meant to help the remediator determine the best method for a particular situation, but professional judgment should always play a role in remediation decisions. For example, if the surface area contaminated by mold is over 100 square feet, it should be contained with double layers of 6 mil polyethylene and a decontamination chamber or airlock constructed for entry and exit.

After the mold is remediated, it’s vital to ensure that your house or building is ready for occupation again. This is accomplished by re-inspecting the affected areas for humidity and moisture readings as well as visual cues. It’s also possible to conduct clearance testing after the cleanup to verify that all mold spores have been eliminated from the area.

To prevent future problems, it’s important to prevent mold growth by cleaning dirty air ducts and keeping them open, removing or sealing crawl spaces, and using exhaust fans in bathrooms and kitchens. It’s also important to keep indoor humidity levels below 50 percent and to fix any leaks as soon as they are discovered.

If you suspect that you have a mold problem, call GreenWorks for a mold inspection and a quote. Depending on your insurance, you may be able to get the cost of remediation covered by your policy. It is also important to communicate with your insurance company early in the process so they can let you know what you need to do.


When it comes to completing mold removal, it’s important to take your time. It’s best to hire a professional company that will take the necessary time to properly clean and dry your home. They can also provide you with recommendations for future maintenance and prevention of mold growth in the area. The length of time that it takes to remove mold varies depending on the type and amount of contamination. If you’re dealing with a serious mold problem, it could take several weeks or even months to get the problem under control.

In most cases, mold will grow in high-moisture areas like kitchens and bathrooms. It may also appear in places that have experienced water damage or leaks. Left unattended, mold can cause health problems and is especially dangerous for those with allergies or respiratory disorders. The CDC reports that it can lead to coughing, wheezing, shortness of breath, and skin irritation.

A variety of household cleaning products can be used to clean surfaces that are contaminated with mold, but it’s best to work with good ventilation and wear protective clothing, such as gloves, goggles, and disposable face masks. Using the wrong cleaner or over-cleaning can lead to more damage and increase exposure to toxic fumes.

To clean surfaces, you can use a nontoxic mold cleaner, such as hydrogen peroxide or vinegar. Be sure to saturate the affected area, wait for several minutes, and scrub the surface with a brush. Then, rinse the area with plain water and allow it to air-dry. For outdoor surfaces, such as wood decks or vinyl siding, you can use a mildew or algae killer with a power washer or garden hose sprayer.

Mold can be prevented by reducing humidity levels in the home, fixing any leaks, and keeping fabrics and surfaces dry. To reduce humidity, open windows and use exhaust fans in the bathroom and kitchen. Keep indoor humidity below 40 percent, and install dehumidifiers in the basement and crawlspaces. It’s also a good idea to have a dehumidifier in the garage to prevent moisture from damaging cars and stored possessions.